Contact us for Enquiry


Top Mustang Mods Under $500


Mustang Mania offer Mustang Mods under $500 ( genuine mustang parts)

Over time, the Ford Mustang radiator can leak, rust, clog, crack, or even be broken, causing your engine to overheat and contaminating your cooling system. You can get your coolant flowing again with LMR’s direct replacement Mustang Aluminum Radiators! Today is the day to get your Mustang!

Are you interested in learning more about the advantages of switching to an aluminum radiator? Check out our aluminum radiator vs. stock radiator comparison to see all of the benefits!


With LMR’s large assortment of aftermarket headlights, you can choose from a factory-style or a bespoke design for your Mustang. For a distinctive look, choose from clear, ultra-clear, black, smoked, one-piece, projector, and halo headlights. Today, brighten the road with our top-of-the-line headlight alternatives.

For those interested in New Edge Mustang headlights, we’ve put together a guide to the finest headlights we have available for 99-04 New Edge Mustangs!


Late Model Restoration can help you match your car’s headlights with a new set of Mustang taillights. Stock, smoked, euro smoked, LED, SVO and a variety of other choices will ensure that you have the precise fit and finish that you want! All lights are designed to be a direct replacement with no modifications required, and are a fantastic way to show off your vehicle!

Also, see our Mustang tail light guide to see how the Mustang Tailights have evolved through the years, from the Fox Body to the S550!


SVE Lowering Springs will give your Fox Body, SN-95, New Edge, S197, or S550 Mustang a superb stance! Not only will it look nice, but it will also provide better handling without sacrificing ride quality. Without breaking the budget, SVE Mustang lowering springs.

mustang lowering springs
Mustang lowering springs

will offer you a terrific stance and improve your handling. Check out our ranked and evaluated best Mustang lowering spring guide for a more in-depth look at the different lowering springs brands!


Replace your Mustang Weatherstrip if it’s dried up, cracked, or loose with one of our exact replacements! Our extensive selection of weatherstrip choices will ensure that your Mustang is properly sealed, protecting it from the elements while also keeping the interior of your car quiet and free of wind noise.

Your Fox Body Mustang’s weatherstrip can degrade, becoming worn, ripped, and brittle after years of lying out in the sun and rain. This Fox Body weatherstrip guide was created to assist you in finding the right weatherstrip for your Fox Body Mustang!


Many people say that a new Mustang Cold Air Kit is the best bang for your buck when it comes to increasing horsepower and MPG for a small investment. Of course, our SVE-branded intake kits come highly recommended, but we also provide a broad range of manufacturers that will provide you with just what you want!


The greatest assortment of Mustang Short Throw Shifters can be found at Late Model Restoration! Shifters are one of the most popular Mustang mods. SVE, Pro 5.0, Steeda, Hurst, and Ford Performance all have manual shifters available at Late Model Restoration. LMR offers the Mustang components you need to move you in the correct direction if you need a short-throw shifter for your Mustang manual gearbox.

If you’re not sure if a short-throw shifter is correct for you, read our explanation of what a short-throw shifter is and the advantages it may provide to your driving experience.


Our Mustang Tuners are a terrific method to unlock your Mustang’s secret horsepower and torque. Late Model Restoration’s SCT programmers can fix air-to-fuel ratios, tune in performance enhancements, and calibrate speedometers following gear installation.

SCT offers a number of portable tuners and programmers, including the renowned SCT X4 tuner. Do you own a Mustang that isn’t OBD II? Don’t worry, we’ve got you covered with programmable engine management system kits. This kit allows you to optimize the performance of your Mustang by adjusting the settings. Get yours now, along with a custom tune, to maximize your Mustang’s power and performance while achieving the highest gas mileage possible.


With an upgrade in look, the MP Concepts Smoked LED Reverse Light increases visibility and safety by replacing the feeble standard incandescent reverse light with 10 ultra brilliant white LEDs.

Mustang led reverse light
Mustang led reverse light

MP Concepts Mustang Reverse LED Light with 10 super bright white LEDs improves rear visibility by being much brighter and wider than the factory incandescent bulb, with a couple of LEDs at the bottom and a couple at the top in between the design. A fourth brake light, which matches your taillights and turns on in brilliant red when you touch the brake, is included in addition to the combo of bright white LEDs. The Mustang Reverse Led Light by MP Concepts is made of a high-strength, light-weighted ABS plastic housing with a smoked Polycarbonate Lens that has been blackened for a stealthy appearance.


MP Concepts Mustang Quarter Eleanor Style Window Scoops provide your contemporary S550 Mustang Shelby GT500 Mustang-inspired sporty flair. The window scoop is made of high-strength, light-weight Acrylonitrile butadiene Styrene (ABS) plastic, which is noted for its outstanding impact resistance and durability. It’s a quick and easy installation that requires no drilling and includes 3M double-sided automotive adhesive tape already put in the rear of the scoops.

MP Concepts Mustang Quarter Eleanor Style Window Scoops
MP Concepts Mustang Quarter Eleanor Style Window Scoops

MP Concepts Mustang Quarter Eleanor Style Window Scoops fit EcoBoost and GT Mustangs from 2015 to 2020.


Installing a matte black MP Concepts Rear Blade Spoiler is a better approach to give your 2015-2020 Mustang a strong track-inspired design. This gives the Mustang a broad, imposing appearance, with a notched center portion that perfectly complements the sculpted lines of the rear bumper cover.

MP Concepts Rear Blade Spoiler
MP Concepts Rear Blade Spoiler

The MP Concepts Rear Blade Spoiler is made of injection-molded acrylic plastic using genuine Ford data to provide optical clarity, rigidity, good impact strength, outstanding durability, and weather and sunshine resistance. Drilling is required for installation, and if your Mustang has a factory rear spoiler, the original holes must be plugged.


MP Concepts Mustang Side Scoops give your Mustang race-inspired flair to help it stand out from the crowd and improve its aesthetic appeal. MP Concepts Mustang Side Scoops come unpainted and are very easy to paint, so you may paint them to match your vehicle or install them right away.

MP Concepts Mustang Side Scoops
MP Concepts Mustang Side Scoops

It will be simpler for you if you test fit these items before painting them. The side scoop is made of high-strength, light-weight Acrylonitrile butadiene Styrene (ABS) plastic, which is noted for its outstanding durability and impact resistance.

Contact Mustang Mania today to get the above-mentioned parts!

Related News